Taking care from one electrical appliance to the other varies and hence it is impossible to render particular instructions for every appliance and make. So if at all you have misplaced your instructions, it is generally a good option to request for a new one. Always ensure that you have given the manufacturer the model number of your appliance, which is generally stamped on some place on it.
Every electrical appliance has to be taken care differently and thus it is quiet impossible to deliver certain instructions for every electrical appliances and the makers. If by mistake your instruction manual is missing, then better ask for new manual. Always insure that you have given the dealer the model number of your appliance, which is mostly stamped somewhere on it.
The fuse will be blown if there is overloading in the circuit with appliances, worn cords, and defective devices. Verify these happenings and then loosen the broken fuse and replace it with a new one. These fuse gets screwed in just like an electric bulb and can be replaced with a new one, but ensure that the fuse you have replaced must be of the same ampere.
If your new fuse which has been replaced by a broken fuse also blows, or you cannot figure out the right problem, call an electrician at once.
Proper bulbs in the lamps and wall lights must be used for getting sufficient light but it does not happen to you, though you have fitted it carefully.
If you are not getting proper light then you are losing a big amount of energy and of course money. It may happen that the lamp bulbs, shades and reflecting bowls must be dirty and soiled. Therefore when ever you are cleaning your furniture firstly switch off the lamp and dust the bulbs, shades and other remaining parts.
If the bulbs and bowls are made up of material where the bulbs and bowls turn greasy easily and also catches dust rapidly, then take them off and wash them. Reflecting bowls and glass shades can be cleaned as regular glassware were cleaned. But take note that bulbs and fluorescent tubes must not be dipped in water. When they get cool, remove them and clean then with a damp soapy cloth but wipe them dry. Always ensure that when you are re-fitting the bulbs and lamps your hands must be dry.
Article Source: http://www.articledirectorylive.com